Guides and Troubleshooting
In order to pair the robot, please follow the steps given below: 1. Take the green forward block and put it in slot number 1 on your function board. 2....
Thu, 16 Apr, 2020 at 5:22 PM
Sometimes the batteries don't connect with the compartment due to some gap between the battery and the receiver in the compartment. In this case, 1...
Thu, 16 Apr, 2020 at 5:20 PM
To eject the SD card, press the SD card in the right slot of the board until you hear a click>> let the SD card come out completely>> then push ...
Thu, 16 Apr, 2020 at 5:26 PM
The bottom five slots on the function board are called the Function Area. You may have received a block that says "Fun"; it is a Function Block ...
Thu, 16 Apr, 2020 at 5:31 PM
Troubleshooting 1: Do you hear a "Welcome to the world of Mochi"audio when you insert the batteries into the board? If not, please eject and ...
Fri, 17 Apr, 2020 at 11:49 AM
To reset the robot: Press the small button in the back of the robot with a pen or a screwdriver. To reset the board: Press the small button on the lef...
Thu, 16 Apr, 2020 at 5:36 PM