In order to pair the robot, please follow the steps given below:
1. Take the green forward block and put it in slot number 1 on your function board.
2. Please press the yellow button at the center on the function board that says "Please Go".
3. You will see lights circling around the board as a robot and the function board searches for each other.
4. Once these devices are paired with each other, the green light will stop blinking and will become steady.
Here is a visual representation:
If the devices don't pair on the first try, please press the yellow button at the center again. If the process is unsuccessful, try taking the batteries out of both devices, insert them again, and restart the above-mentioned process.
Please make sure that there aren't too many Bluetooth devices turned on while these devices are pairing. And be sure to keep the distance of the board and the robot between 10-15 centimeters.
Please contact hello@learnwithmochi.com if you face any issues.